Arris C4 - Configure Snmp-Server Contact

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2536
configure snmp-server contact
Purpose
Sets the system contact information, or sets the value of the MIB variable sysContact.
Default Access Level
15
Command Syntax
configure snmp-server contact <contact information string>
configure snmp-server contact <contact information string> no
Supplemental
Information
To remove the contact information, use the no option.
Parameters
<contact
information string>
Input the contact information for the C4 CMTS
Related Commands
show snmp contact (page 3036)