Arris C4 - Configure Interface Cable-Mac Voice-Limits

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1694
configure interface cable-mac * voice-limits
Purpose
Sets the PacketCable CAC parameters for all upstream and downstream channels.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac> voice-limits [allowed-normal <int>] [allowed-emergency> <int>]
[allowed-total <int>] [reserved-emergency <int>] [reserved-normal <int>]
Supplemental
Information
N/A
Parameters
<mac>
The MAC identifier. Valid numbers are 0-415.
[allowed-normal
<int>]
Maximum percent downstream and upstream channel bandwidth allowed for normal voice use. Valid range is 0 to 90.
[allowed-
emergency <int>]
Maximum percent downstream and upstream channel bandwidth allowed for emergency voice use. Valid range is 0 to 90.
[allowed-total
<int>]
Percent downstream and upstream channel bandwidth allowed for all classes of voice traffic. Valid range is 0 to 90.
[reserved-
emergency <int>]
Minimum percent downstream and upstream channel bandwidth allowed for emergency voice use Valid range is 0 to 90.
[reserved-normal
<int>]
Minimum percent downstream and upstream channel bandwidth allowed for normal voice use. Valid range is 0 to 90.