Arris C4 - Configure Interface Link-Aggregate Ipv6 Nd Ra Reachabletime

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1902
configure interface link-aggregate * ipv6 nd ra reachabletime
Purpose
Sets the amount of time a neighbor is considered ‘reachable’ after last confirmation.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> ipv6 nd ra reachable-time <0-3600000>
configure interface link-aggregate <0-9[.0-254]> ipv6 nd ra reachable-time [<0-3600000>] no
Supplemental
Information
To reset to the default time, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<0-3600000>
Milliseconds