Arris C4 - Cconfigure Interface Gigabitethernet Ip Ospf Auto-Delete-Neighbor

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1754
configure interface gigabitethernet * ip ospf auto-delete-neighbor
Purpose
Automatically deletes the neighbors when adjacency is lost.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip ospf auto-delete-neighbor
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip ospf auto-delete-neighbor no
Supplemental
Information
To reset, use the no version.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]