Arris C4 - Configure Qos-Sc Enforce-Rule Enforce-Name Trigger

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2237
configure qos-sc enforce-rule * enforce-name * trigger
Purpose
Configures an enforce rule.
Default Access Level
15
Command Syntax
configure qos-sc enforce-rule <word> enforce-name <word> trigger <int> [sampling-interval <int>]
[history <word>] [penalty-duration <word>]
configure qos-sc enforce-rule <word> enforce-name <word> trigger <int> [sampling-interval <int>]
[history <word>] [penalty-duration <word>] no
Supplemental
Information
To remove an enforce rule, use the no option.
Parameters
<word>
Reference Service Class name.
<word>
Enforce rule SCN name
[sampling-interval
<int>]
Sampling interval in minutes <5 | 10 | 15 | 30>
[history <word>]
History duration in hours OR hours:minutes <hh OR hh:mm format>
[penalty-duration
<word>]
Penalty duration in hours OR hours:minutes <hh OR hh:mm format>