Arris C4 - Configure Interface Tengigabitethernet Encapsulation Dot1 Q Priority

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1962
configure interface tengigabitethernet * encapsulation dot1q * priority
Purpose
Defines the 802.1p priority bits on the egress.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>/.<0-254> encapsulation dot1q <int> priority [<int>]
[iptos]
configure interface tengigabitethernet <slot>/<port>/.<0-254> encapsulation dot1q <int> priority [<int>]
[iptos] no
Supplemental
Information
To return to default settings, use the no option.
Parameters
<slot>/<port>/.<0-
254>
RCM slot number/tengigabitEthernet port number/subinterface number.
Valid range for the C4 CMTS is <17-18>/<10>/.<0-254>
Valid range for the C4c CMTS is <17>/<10>/.<0-254>
<int>
Q-tag as defined by IEEE 802.1Q
[<int>]
Fixed priority value
[iptos]
Maps IP TOS precedence to priority bits