Arris C4 - Show Cable Fiber-Node

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2651
show cable fiber-node
Purpose
Display fiber node information.
Default Access Level
15
Command Syntax
show cable fiber-node [<fn_name>] [detail] [not-valid] [cable-mac <int>] [mCMsg <int>] [mDSsg <int>]
[mUSsg <int>]
Supplemental
Information
N/A
Parameters
[<fn_name>]
Fiber node name up to 16 characters long
[detail]
Displays fiber node for all ports including ones with problems.
[not-valid]
Displays only problem fiber-nodes
[cable-mac <int>]
MAC identifier (valid numbers are 0-415).
[mCMsg <int>]
MAC domain cable modem service group identifier. Valid range is 1-4294967295.
[mDSsg <int>]
MAC domain downstream service group identifier. Valid range is 1-255.
[mUSsg <int>]
MAC domain upstream service group identifier. Valid range is 1-255.