Arris C4 - Configure Router Bgp Address-Family Ipv6 Redistribute Ospf

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2373
configure router bgp * address-family ipv6 redistribute ospf
Purpose
Configures the type of OSPF routes to redistribute into BGP.
Default Access Level
15
Command Syntax
configure router bgp [<int>] address-family ipv6 redistribute ospf [match {internal | external1 |
external2}] [metric <int>] [route-map <word>]
configure router bgp [<int>] address-family ipv6 redistribute ospf [match {internal | external1 |
external2}] [metric <int>] [route-map <word>] no
Supplemental
Information
To disable, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
[match {internal |
external1 |
external2}]]
Redistributes either internal routes, external type 1 routes, or external type 2 routes.
[metric <int>]
Metric associated with redistributed routes.
[route-map
<word>]
Route-map used to modify BGP attributes of redistributed routes.