Arris C4 - Configure Interface Tengigabitethernet Ipv6 Nd Dad Attempts

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2018
configure interface tengigabitethernet * ipv6 nd dad attempts
Purpose
Sets the number of neighbor solicitation messages sent to detect duplicate addresses.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 nd dad attempts <0-600>
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 nd dad attempts [<0-600>] no
Supplemental
Information
To restore the default setting, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]
<0-600>
Number of neighbor solicitation messages.