Arris C4 - Configure Cable Metering Session-ID Data-Ack-Window

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1381
configure cable metering session-id * data-ack-window
Purpose
Configures the maximum number of records the Collector must receive before sending a DATA-ACK to the Exporter.
Default Access Level
15
Command Syntax
configure cable metering session-id <1-255> data-ack-window <1-65535>
configure cable metering session-id <1-255> data-ack-window <1-65535> no
Supplemental
Information
To remove the session ID used in the header of the IPDR protocol message, use the no option.
Parameters
<1-255>
Session ID.
<1-65535>
Maximum number of records.
Related Commands
show cable metering (page 2669)
configure cable metering (page 1369)