Arris C4 - Configure Ip Vrf

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2097
configure ip vrf
Purpose
Creates a virtual router via "name".
Default Access Level
15
Command Syntax
configure ip vrf <vrf-name> [icmp-time-exceeded] [ospf]
configure ip vrf <vrf-name> [icmp-time-exceeded] [ospf] no
Supplemental
Information
Note: The icmp-time-exceeded parameter must be run or traceroute through the CMTS will not work.
To delete a virtual router or to turn off OSPF for the virtual router default, use the no option.
Parameters
<vrf-name>
The name assigned to the virtual router
[icmp-time-
exceeded]
Turns on transmission of ICMP Time Exceeded message
[ospf]
Turns OSPF on for the named virtual router