Arris C4 - Configure Route-Map Match Ip Route-Source Prefix-List

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2267
configure route-map * match ip route-source prefix-list
Purpose
Matches routes based on the prefix-list name of the advertising router.
Default Access Level
15
Command Syntax
configure route-map <word> match ip route-source prefix-list <name>
configure route-map <word> match ip route-source [prefix-list <name>] no
Supplemental
Information
To remove the route-source entry, use the no option.
Parameters
<word>
Name of this route-map
[prefix-list <name>]
Name of a specific prefix list.