Arris C4 - Configure Interface Link-Aggregate Isis Hello-Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1922
configure interface link-aggregate * isis hello-interval
Purpose
Computes the hello interval based on the hello multiplier so that the resulting hold time is 1 second.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> isis hello-interval <10-600000> <level1 | level2>
configure interface link-aggregate <0-9[.0-254]> isis hello-interval [<level1 | level2>] no
Supplemental
Information
N/A
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<10-60000>
Specifies the milliseconds between hello packets (before multiplier)
[<level1 | level2>]
Specifies the type of adjacencies to be formed on this interface. If no value is specified, then modify value for both level-1 and level-
2.