Arris C4 - Page 3056

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 3056
telnet
Purpose
Initiates a telnet session to the specified target.
Default Access Level
1
Command Syntax
telnet <IP address | hostname> [dest-port <addr>]
Supplemental
Information
The specified target can be either an IP address or hostname if the hostname has been configured on the C4 CMTS.
Parameters
<ip address |
hostname>
IP address or hostname (if a hostname has been configured on the C4 CMTS) to telnet to.
[dest-port <addr>]
Destination port address.