Arris C4 - Page 342

Chapter 11: Basic Bring-up Procedure for the C4 CMTS
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 342
FN1 1 2 U1 1/0 1/1 1/2 1/3
* Indicates that downstream channel is not primary-capable.
Verify the MAC Domain configuration:
show interface cable-mac <mac>
What follows is an example of the show interface cable-mac 1 output:
show interface cable-mac 1 brief
Cable-mac 1
=============
Cable Oper Mod Power Spare LBal
DS Port Mac Conn State Annex Freq(Hz) Type (.1dBmV) Group Group
14/0 1 0 IS B(US) 321000000 q256 490 - 16781312
14/1 1 0 IS B(US) 327000000 q256 490 - 16781312
14/2 1 0 IS B(US) 333000000 q256 490 - 16781312
14/3 1 0 IS B(US) 339000000 q256 490 - 16781312
14/4 1 0 IS B(US) 345000000 q256 490 - 16781312
14/5 1 0 IS B(US) 351000000 q256 490 - 16781312
14/6 1 0 IS B(US) 357000000 q256 490 - 16781312
14/7 1 0 IS B(US) 363000000 q256 490 - 16781312
Cable Oper Chan Channel Mini Mod Power Spare LBal
US PORT Mac Conn State Type Freq(Hz) Width Slot Prof (dBmV) Group Group
1/0 1 0 IS tdma 10000000 3200000 4 2 0 - 16781312
1/1 1 0 IS tdma 20000000 3200000 4 2 0 - 16781312
1/2 1 0 IS tdma 30000000 3200000 4 2 0 - 16781312
1/3 1 0 IS tdma 40000000 3200000 4 2 0 - 16781312
If you desire more detailed information on the cable-mac, use show interface cable-mac <number> instead.
To display the supervisory downstream for the upstream, enter:
show cable supervision
An example of the show interface cable supervision output:
show cable supervision
MAC US DS Method
----- ------- ----- -----------