Chapter 20: CPE Device Classes
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 658
InOctets = 0 OutOctets = 256
InUcastPkts= 0 OutUcastPkts= 2
InDiscards = 0 OutDiscards = 0
InErrors = 0 OutErrors = 0
InMulticastPkts= 0 OutMulticastPkts= 2
cable 2/1.0, VRF: default, IP Address: 10.131.192.1/19
Secondary IP Address(es):
10.131.224.1/19
Physical Address: 0001.5c22.63e5
MTU is 1500
DHCP Policy mode is enabled
DHCP Server Helper Address(es):
10.50.31.3 for Traffic Type "any"
Directed Broadcast is disabled
ICMP unreachables are always sent
Multicast reserved groups joined: None
Source-verify is disabled
InOctets = 1237135 OutOctets = 1219074
InUcastPkts= 1564 OutUcastPkts= 1571
InDiscards = 0 OutDiscards = 0
InErrors = 0 OutErrors = 0
InMulticastPkts= 0 OutMulticastPkts= 2
The following is a sample output of the
show ip interface cable-mac 1.0
:
show ip interface cable-mac 1.0
cable 1/0, VRF: default, IP Address: 10.101.128.1/19
Secondary IP Address(es):
*14.14.14.14/24 14.111.114.114/24
Physical Address: 0001.5c22.c8de
MTU is 1500
DHCP Policy mode is disabled (primary mode)
DHCP Server Helper Address(es):
10.50.1.3 for Traffic Type "any"
10.50.1.4 for Device Class “cpe”
10.50.1.5 for Device Class “cpe”
10.50.1.6 for Device Class “mta”
10.50.1.7 for Device Class “stb”
10.50.1.7 for Device Class “ps”
10.50.1.9 for Device Class “host”
To Next Page
Loading...
