EasyManua.ls Logo

Arris C4 - Page 713

Arris C4
3180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 22: Channel Bonding
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 713
14:00:50 13 debg: Debug:cm-status.msgs.expected:CM-STATUS from MAC=00:00:ca:d4:db:33, Transaction=1:
Report: QAM/FEC - lock lost for Downstream Chan ID=2
14:00:56 13 debg: Debug:cm-status.msgs.expected:CM-STATUS from MAC=00:00:ca:d4:db:33, Transaction=1:
Report: QAM/FEC - lock recovery for Downstream Chan ID=2
The C4/c CMTS will generate notice-level logging when disruption in modem ranging occurs on a non-primary channel. For
example:
12:26:25 13 notc: MAC=00:15:a4:a4:58:1f; Upstream portNumber 3; SMRanger - Ranging opportunities
exceeded on non-primary upstream. Removed non-primary upstream from service flows.
12:27:39 13 notc: MAC=00:15:a4:a4:58:1f; Upstream portNumber 3; SMRanger - Non-primary upstream
resumed response to ranging opportunities. Restored non-primary upstream to service flows.
The output of the show cable modem detail command reflects when a CM is in an impaired state. The following is an
example of the output:
show cable modem detail
14/0-3/0 CM 0015.d187.3c15 (Arris) D3.0 State=Operational D1.1/atdma PrimSID=8194
Cable-Mac= 2, mCMsg = 1 mDSsg = 1 mUSsg = 1 RCP_ID= 0x0010000005 RCC_Stat= 2, RCS=0x01000001
TCS=0x01000001
Timing Offset=1072 Rec Power= 0.00 dBmV Proto-Throttle=Normal dsPartialServMask=0x00000000
usPartialServMask=0x00600000
Uptime= 0 days 0:01:17 IPv4=10.137.95.251 cfg=cw_basic_30.bin
LB Policy=0 LB Group=25167872 Filter-Group CM-Down:0 CM-Up:0
Privacy=Disabled
MDF Capability= GMAC Promiscuous(2) MDF Mode= MDF Enabled(1)
u/d SFID SID State Sched Tmin Tmax DFrms DBytes CRC HCS Slot/Ports
uB 9 8194 Activ BE 0 0 0 0 0 0
3/20,(21),(22),23
dB 10 *5 Activ 0 0 5 1126 14/0,1,2,3
L2VPN per CM: (Disabled)
Current CPE=0, IPv4 Addr=0, IPv6 Addr=0 Max CPE=16, IPv4 Addr=32, IPv6 Addr=64
The show cable modem bonded-impaired command provides information on CMs that are not functioning at full capacity.
It also states the reason for the impaired state. (See for more details.)
show cable modem bonded-impaired
Feb 1 10:57:07
Interface Actual Impair Impair DOC
(DS-US) Mac Bonded Bonded Port Reason SIS MAC address IP Address
----------- ---- ------ ----- ----- ------- --- --------------- ------------------
14/4- 2/2.0 2 4x2 4x1 U2/3.0 badTcs 3.0 0015.d002.e5d9 10.114.194.253

Table of Contents

Related product manuals