Chapter 28: PacketCable™ Services and Voice Applications
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 822
Version: I05(COPS version 4.0)
Remotely connected SubscriberID VRF: default
Gate Message Throttling:
SCM NORMAL max Gate Messages per 10 seconds: 900
SCM YELLOW max Gate Messages per 10 seconds: 900
SCM RED max Gate Messages per 10 seconds: 300
Admission Control Limits:
Upstream Downstream
Priority Reserved Allowed Reserved Allowed
-------- ------- -------- -------
Norm Voice 0% 50% 0% 50%
Emrg Voice 0% 70% 0% 70%
Total 70% 70%
Preemption: enabled
IP Multicast -
Mcast CAC: disabled
Event Messaging Parameters
Enabled: no - cadEvMsgEnableFlag disabled
Element ID: 12345
Event messaging UDP source port: 1813
Maximum number of events per batched message: 10
Batch timer: 1 minute
ACK timer: 8000 milliseconds
Maximum number of retransmissions to RKS: 0
Viewing Connected Network Elements — To display the current connections, issue the following CLI command:
show netstat
The
show packetcable cops server
command can also be used to obtain this information.
Look for TCP connections with a state of ESTABLISHED at ports 2126, 1813, and 3918 on the CMTS.
The C4/c CMTS generates an output similar to the following:
show packetcable cops servers
Proto Local Addr Foreign Address (state)
------ --------------- ---------------------- ------------------
udp 0.0.0.0.123
udp 0.0.0.0.161
udp 0.0.0.0.1813
udp 0.0.0.0.49152
udp 0.0.0.0.49155
udp 0.0.0.0.49162
To Next Page
Loading...
