Blackmagicdesign URSA - Recording Format Settings; File Naming Standards; Screen Display Settings

When the ‘rec’ button is pressed in time lapse mode, the timecode counter updates when a frame
of video is recorded. To set the time lapse interval setting, touch the time lapse interval arrow
icons. Remember to set the time lapse feature to ‘off’ when you want to record at standard speed.
File Naming Convention
Clips are recorded to your CFast cards in the CinemaDNG RAW format or to a ProRes
QuickTime movie, depending upon which recording format you have chosen. Blackmagic URSA
uses the following file naming convention when recording video.
[Camera ID]_[Reel Number]_[yyyy-mm-dd]_[hhmm]_C[Clip number].mov
The table below shows an example of the file naming convention:
Blackmagic URSA_1_2017-02-17_1803_C0002.mov QuickTime Movie Filename
Blackmagic URSA_1_2017-02-17_1803_C0002.mov Camera ID
Blackmagic URSA_1_2017-02-17_1803_C0002.mov Reel Number
Blackmagic URSA_1_2017-02-17_1803_C0002.mov Date (2017 Feb 17)
Blackmagic URSA_1_2017-02-17_1803_C0002.mov Time (18:03pm - 24hrs)
Blackmagic URSA_1_2017-02-17_1803_C0002.mov Clip Number
For CinemaDNG files, the folder of the image sequence will also be named the same way.
Display Settings
To adjust the ‘display’ settings on a touchscreen, select the display touchscreen menu, then tap
or slide the relevant arrows and sliders. Scroll the menu to reveal more display settings.
Scroll the menu to reveal more
display settings.
35Blackmagic URSA Settings