CAPINTEC, INC. CAPTUS
®
4000e
5-16 QUALITY ASSURANCE August 17
1. Select the Chi-Square Test button or press Alt+H on Figure 5-1 Quality Assurance Main
Screen. The screen appears as shown in Figure 5-16 Chi-Square Test Screen.
Figure 5-16 Chi-Square Test Screen
2. Note that in the Select Detector frame, PROBE is selected by default. To change the
detector to Well, select the WELL radio button.
3. Select the Setup button or press Alt+T. Figure 5-17 Quality Setup Screen will appear.
Only the Chi-Square Test frame values are used in this test.
To Next Page
Loading...