CAPINTEC, INC. CAPTUS
®
4000e
July 16 ISOTOPES 6-7
Figure 6-8
7. Select the Start Procedure button or press Alt+S to start measurements. Alternatively,
select the Exit button or press Alt+E to return to Figure 6-1 Isotopes Main Screen.
8. When the procedure is started, the Background measurement message window shown in
Figure 6-9 will appear.
Figure 6-9
To begin counting the Background, verify that there are no radioactive sources nearby
and select the OK button. Otherwise, select the Cancel button to return to the
measurement screen. The Data Acquisition screen appears as shown in Figure 6-10.
To Next Page
Loading...