ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 147 Version 1.4.9.0
It is also possible to release a Playback with time by typing a number and then pressing REL. For
example, 3 REL releases the currently selected playback over 3 seconds.
In addition it is possible to clear the programmer and to enter and exit blind mode with times. Press 5
CLEAR to clear the programmer over 5 seconds. Press 10 BLIND to enter blind mode over 10 seconds.
17.12 Busking Master
It is possible in the Setup Window to set the manual cross-fade fader to be a “busking rate” sub-master
from 0 seconds to 10 seconds. The rate is shown in the bottom right of the Status Display. The time is
applied to selection of palettes and intensities. When FAN mode is selected the change is applied in turn
across each of the selected heads.
To Next Page
Loading...
