ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 306 Version 1.4.9.0
41 Handy Hints
• Use SHIFT and the cursor keys to carry out actions on multiple items in a Window.
• When recording items, type in a name for the item on the external keyboard before pressing the REC
button.
• To force a minimum look on stage (e.g. during a changeover) whilst allowing full programming
capability, set the minimum value of one or more channels in the Patch Window to a non zero value.
• When using encoders, to bump to the next range value (e.g. next colour), press the button associated
with the encoder. To bump back, hold SHIFT and press the button.
• To modify a playback, press and hold the SELECT button associated with the playback and then use
the encoders or key in new values.
• If your CMY colours are coming out inverted – i.e. red is cyan, green is purple, blue is yellow, then
you need to set the CMY Invert option for that personality in the Head Editor.
• To restart the look in the programmer press BLIND twice.
• If you find yourself constantly changing Windows to perform an action, try sizing the required
Windows and recording it as a View.
• After you have cleared the programmer you can reselect the heads that were selected when you
pressed CLEAR by pressing the ALL button.
• To remove attributes from an entire Cue Stack (e.g. position information) activate those attributes in
the programmer and use the RECORD REMOVE option.
• To add attributes into an entire Cue Stack (e.g. position information) activate those attributes in the
programmer and use the RECORD MERGE option.
• To Record Merge the current contents of the programmer into the current Cue on a Cue Stack, press
and hold the Select button of the playback and press RECORD.
• Use the “Lamp On All” and “Lamp Off All” soft buttons in the Macro Window to make turning on/off
an entire lighting rig easier.
• On the MagicQ PC use F1 to F10 to toggle Playbacks PB1 to PB10 on / off. Use ESC to turn all
Playbacks off.
To Next Page
Loading...
Need help?
General
