ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 283 Version 1.4.9.0
Time code can be triggered from an external SMPTE time code source using the optional ChamSys
MIDI/SMPTE module, or it can run from the internal time code source. To control a Cue Stack using
external time code set the “External time code” option in the Cue Stack options.
Cues can be set to time code by changing the Halt field in the Cue Stack window (double click on it or
press SHIFT + ENTER.
When a Cue Stack that contains time code cues is activated the time code takes control of the Cue Stack
and each Cue executes at the time code specified. For Internally generated time code, activating the Cue
Stack starts the time code at 0/0/0. For external time code the time code will be read from the external
module.
34.1.1 Emabling / Disabling Timecode
It is possible to turn timecode on and off for a Cue Stack using soft button A in the Cue Stack Window.
When timecode is turned off the Cue Stack will not execute timecode Cues. When turned on it will
execute timecode Cues according to the Internal/External setting.
Press SHIFT + soft button A to avoid the confirmation request.
It is also possible to change the Cue Stack from Internal to External timecode using the soft button C.
Press SHIFT + soft button C to avoid the confirmation request.
To Next Page
Loading...
Need help?
General
