EasyManuals Logo

ChamSys MagicQ User Manual

ChamSys MagicQ
328 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 19 Version 1.4.9.0
MagicQ PC supports the same functionality and user interface as the physical consoles making it easy to
move between the two products. MagicQ PC can also be used to run complete shows, either as a back-up
to the main console or as console in its own right.
Connecting the MagicQ PC Wing to MagicQ PC gives the playback and programming control of the
MagicQ consoles (faders, encoders and buttons) but with a small lightweight (6KG) solution that can
easily be carried onto an aeroplane as hang luggage.
All MagicQ console products are built upon the mission critical Linux operating system. MagicQ PC can
run under Windows, Linux or on Apple Macs.
1.2 DMX512 and Art-Net outputs
The console supports both DMX512 serial and Art-Net and Pathport options. A LAN connector on the
rear panel provides an Ethernet interface for up to 18 universes of Art-Net, ArtNet II, Pathport or ACN.
This enables the console to be connected directly to Art-Net or Pathport based installations.
DMX512 serial outputs are available directly from the MagicQ Expert, Pro and Pro 2010 series of
consoles.
ChamSys provides a range of Art-Net to DMX convertors including a 3 Universe Art-Net to DMX
interface which can be used to convert any of the 18 Art-Net universes to be output on DMX512 serial.
For systems requiring all 18 universes on DMX512 serial, multiple boxes may be purchased.
The provision of both Art-Net and DMX512 serial allows a choice of which protocol is used to connect
between console and stage. The Art-Net to DMX512 convertor box may be situated at the console or at
the stage – whichever is most appropriate.
For new systems it is likely to be more cost effective to run a pair of Ethernet cables rather than a much
larger number of DMX512 cables. The Ethernet cables support both DMX512 inputs and outputs.
However, there is obviously a large amount of serial DMX cable already in use and thus the changeover is
likely to be gradual.
1.3 Care of your MagicQ console
To keep your MagicQ in best condition please observe the following recommendations:
Keep liquids away from the MagicQ. Drinks split over your console may cause irreparable
damage.
Keep the console out of direct sunlight – place the console in the shade.
Do not use the console outside its operating temperature range.
Handle the console with care when moving or transporting it. The console contains
components that may be damaged by shock. Always use a padded flight case or padded bag
wherever possible.
Do not use solvents or cleansers to clean the console. Do not rub firmly on the metal or
plastic surfaces – this may cause the paint or lettering to be removed. Gently use a damp
cloth to clean the panels.
1.4 Safety Information

Table of Contents

Other manuals for ChamSys MagicQ

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ChamSys MagicQ and is the answer not in the manual?

ChamSys MagicQ Specifications

General IconGeneral
TypeLighting Control Console
ManufacturerChamSys
SoftwareMagicQ
NetworkingYes
MIDI SupportYes
SMPTE SupportYes
Cues5000
Cue Stacks2000
EncodersVaries by model
TouchscreenYes
Universes64
Number of fixturesUnlimited (software dependent)
Network Ports4
DMX Outputs4
InputsMIDI, SMPTE
CompatibilityWindows, macOS, Linux (for software)
FeaturesPixel Mapping
FadersVaries by model (Mini Wing: 12, PC Wing: 10, MQ50: 12+12, MQ80: 10, MQ70: 10, MQ100 Pro: 10, MQ300 Pro: 15)

Related product manuals