ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 190 Version 1.4.9.0
In this mode the console simply operates as a 48 channel traditional theatre console with 48 dimmers
patched on Universe 1 at channels 1 through 48.
If a MagicQ Wing, MagicQ Twin DMX Interface or MagicDMX interface is connected to MagicQ then
the 48 channels will be automatically output on the 1
st
output.
There are 10 Playback Faders labelled PB1 to PB10. Depending on your screen resolution you may have
a S, > and || button for each fader. Pressing in the box labelled PB1 to PB10 is the same as pressing the
appropriate S button.
To record a Cue set the faders as required. Then press REC and press the S button of the Playback fader
you wish to record it to.
Press CLEAR to clear the Programmer and retrun the faders to their defaults.
To record a chase, record multiple Cues to a Playback fader simply record more than one cue to a
Playback fader.
To remove the Cues from a fader press REM and press the S button of the Playback fader you wish to
remove Cues from.
To name a fader press SET and press the S button of the Playback fader you wish to name. You will be
shown a text entry box. Type the name followed by RETURN.
Multiple pages of faders are supported through the Next Page / Previous Page buttons.
It is possible to interchange between the Normal and Simple views of the console by pressing the Norm
and Simple buttons in the top right corner of the Application.
20.2 Technician Test Fixture
To Next Page
Loading...
Need help?
General
