ChamSys MagicQ User Manual

ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 288 Version 1.4.9.0
35.5 Winamp Settings
There are various preferences you can set in Winamp to best match your application. Particular attention
should be paid to the preferences regarding playback control, such as repeating a track once finished and
manual playlist advance.
MagicQ will only send Play/Pause/Stop/Change track/Change position commands to Winamp, so it is up
to the user to configure Winamp to work best for their requirements. For example, for some sound effects,
you may wish to loop them, in which case you require the repeat function to be on, and manual playlist
advance to be on. For other single shot sound effects or music tracks, you would only wish for them to
play once, and not continue to the next track.

ChamSys MagicQ Specifications

General

Type	Lighting Control Console
Manufacturer	ChamSys
Software	MagicQ
Networking	Yes
MIDI Support	Yes
SMPTE Support	Yes
Cues	5000
Cue Stacks	2000
Encoders	Varies by model
Touchscreen	Yes
Universes	64
Number of fixtures	Unlimited (software dependent)
Network Ports	4
DMX Outputs	4
Inputs	MIDI, SMPTE
Compatibility	Windows, macOS, Linux (for software)
Features	Pixel Mapping
Faders	Varies by model (Mini Wing: 12, PC Wing: 10, MQ50: 12+12, MQ80: 10, MQ70: 10, MQ100 Pro: 10, MQ300 Pro: 15)