ChamSys MagicQ - Map Keys to THRU, @, FULL

ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 172 Version 1.4.9.0
CTRL ALT SPACE ALT CTRL
Windows are opened using CTRL and the alphanumeric keys
CTRL A
CTRL B Beam
CTRL C Colour
CTRL D
CTRL E Execute
CTRL F Fx
CTRL G Group
CTRL H Help
CTRL I Intensity
CTRL J
CTRL K
CTRL L Cue Stack
CTRL M Media
CTRL N Macro
CTRL O Outputs
CTRL P Position
CTRL Q Cue
CTRL R Programmer
CTRL S Setup
CTRL T Patch
CTRL U Page
CTRL V Playback
CTRL W Cue Stack Store
CTRL X Cue Store
CTRL Y
CTRL Z
Playback shortcuts
F1 to F10 toggle playbacks 1 to10 on/off
1 to 0 select playbacks 1 to 10
Q to P GO button playbacks 1 to 10
A to ; STOP button playbacks 1 to 10
\ to . Swap to this playback on
` Add / Swap mode
SPACE Manual GO
# Manual STOP
[ Next page
] Prev page
- Release
Note that in playback shortcuts mode many programming options will not work as expected because the
keyboard keys are used for busking.
19.8.12 Map Keys to THRU, @, FULL
This setting allows the THRU, @ and FULL keys to be mapped to different keys on the keyboard. This is
useful in some countries where the normal mappings (>, @ and #) are not easy to select. To set this
setting, simply press the 3 keys you wish for the functions followed by ENTER.