ChamSys MagicQ User Manual

ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 303 Version 1.4.9.0
39.6.6 Troubleshooting
Problem: WYSIWYG does not receive any data.
Solution: Check that the connection is connected in WYSIWYG device manager. Check that you have
configured the correct MagicQ universes to use WYSIWYG as their Vsualiser.
Problem: WYSIWYG will not connect on the same PC as MagicQ.
Solution: Check that you have configured the Visualiser to be WYSIWYG (same PC) in the Setup
Window.
Problem: WYSIWYG will not connect between two separate PCs.
Solution: Check that the network ports on the two PCs are configured to the same IP subnet, that they are
enabled, and that you have configured MagicQ to use the correct network port (Setup, View Settings, IP
address).
Problem: WYSIWYG connects but no control of the lamps
Solution: Check the MagicQ Universe in WYSIWYG is bound to the MagicQ device.
39.7 ESP Vision
ESP vision supports ArtNet control. Simply set the required universes to Out Type of ArtNet and enable
them. The Visualiser field should be set to “None”.

ChamSys MagicQ Specifications

General

Type	Lighting Control Console
Manufacturer	ChamSys
Software	MagicQ
Networking	Yes
MIDI Support	Yes
SMPTE Support	Yes
Cues	5000
Cue Stacks	2000
Encoders	Varies by model
Touchscreen	Yes
Universes	64
Number of fixtures	Unlimited (software dependent)
Network Ports	4
DMX Outputs	4
Inputs	MIDI, SMPTE
Compatibility	Windows, macOS, Linux (for software)
Features	Pixel Mapping
Faders	Varies by model (Mini Wing: 12, PC Wing: 10, MQ50: 12+12, MQ80: 10, MQ70: 10, MQ100 Pro: 10, MQ300 Pro: 15)