ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 171 Version 1.4.9.0
In addition the “Intensity” attribute will also appear on Encoder F in the Pos window if that encoder is not
already used for position attributes.
19.8.8 Swap pan and tilt encoders
This setting swaps over the pan and tilt encoders. By default the left encoder is pan and the right encoder is tilt.
19.8.9 Swap Encoder direction
The following options are supported:
• Normal
• Swap all encoders
• Swap both pan and tilt encoders
• Swap pan encoder only
19.8.10 Swap Palette & Cursor Page Buttons
Enables the Cursor Page buttons (Page Left, Home, Page Up, Page Right, End, Page Down) to be used as
Palette buttons (Group, Int, Fx, Pos, Col, Beam). This makes it easier to select Palettes using the keypad.
When this mode is enabled the Palette Buttons become the Cursor Page buttons.
It is strongly recommended that you do not change the physical key caps of these buttons since this may
cause irreparable damage to the front panel board.
19.8.11 MagicQ PC keyboard mode
This mode sets the function of the keyboard.
1. Normal: the keyboard is used for naming items and selecting heads
2. Programming shortcuts: the keyboard is set up for shortcuts to programming keys
3. Playback shortcuts: the keyboard is set up for shortcuts for playback keys
Programming shortcuts
¬
1 2 3 4 5 6 7 8 9 0 - +
TAB NEXT
PAGE
PREV
PAGE
ODD
EVEN
REC
ORD
UPD
ATE
INC PREV
HEAD
THRU *
ENTER
ALL SET REM
OVE
FAN SIN
GLE
HICH
LIGHT
LOC
ATE
@ FULL
SHIFT CLEAR COPY BLIND MOVE NEXT
HEAD
. / SHIFT
To Next Page
Loading...
Need help?
General
