ChamSys MagicQ User Manual

ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 154 Version 1.4.9.0
To load new software onto the system, copy the .cde file using networking into the main MagicQ folder
and select the file in File Manager. Alternatively, insert a USB stick and select the file in File Manager
Note that this new upgrade functionality is only available once v1.3.4.9 software or above is loaded on the
system. To get v1.3.4.9 on the system you will need to use the original method by powering the console
down and entering the software utility on startup.
18.17 Resetting a MagicQ console to factory defaults
The console software upgrade utility has 2 other functions – reset to factory defaults and erase console.
“Reset to factory defaults” changes settings back to factory settings but does not erase any user data. It is
recommended that the current show is saved to a known file name before carrying out a factory reset. As
a consequence of the reset to factory defaults, the console will reload the default show.
“Erase console” erases all user data and reloads the newest software on the system. All show data, custom
personalities, and settings will be erased. Ensure all user data is saved before carrying out this action.
It is now no longer necessary to recalibrate the touch screen after a factory reset.

ChamSys MagicQ Specifications

General

Type	Lighting Control Console
Manufacturer	ChamSys
Software	MagicQ
Networking	Yes
MIDI Support	Yes
SMPTE Support	Yes
Cues	5000
Cue Stacks	2000
Encoders	Varies by model
Touchscreen	Yes
Universes	64
Number of fixtures	Unlimited (software dependent)
Network Ports	4
DMX Outputs	4
Inputs	MIDI, SMPTE
Compatibility	Windows, macOS, Linux (for software)
Features	Pixel Mapping
Faders	Varies by model (Mini Wing: 12, PC Wing: 10, MQ50: 12+12, MQ80: 10, MQ70: 10, MQ100 Pro: 10, MQ300 Pro: 15)