ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 181 Version 1.4.9.0
The options are None, WEP, WPA or MQ.
WEP and WPA are secure wireless encryption methods. Set the key in the Wireless Key field.
MQ keeps the wireless open but requires users to enter a password to connect to the console. The password
should be set in the Wireless Key field. When this option is selected the Iphone remote will be passworded
regardless of whether the connection is made through a USB to Wireless interface or an access point external to
the MagicQ system.
19.12.17 Wireless key
Wireless encryption type when using a USB to Wireless interface with the MagicQ Pro 2010 console.
19.13 Port Settings
19.13.1 MagicQ USB Wings and Interfaces
This setting enables MagicQ Wings and ChamSys USB interfaces to be connected. The options are No,
Yes, and Yes – auto DMX.
This option affects MagicQ Wings (Mini, PC, Maxi, Extra, Playback, Execute) and USB Interfaces (Twin
DMX, Audio, SMPTE).
When set to Yes – auto DMX then MagicQ
automatically outputs DMX on the Wings starting from Universe
1 – provided that none of the Universes have been explicitly set to “MQ Wing”.
19.13.2 MagicDMX mode
The options are None, DMX Out or DMX In. This option defaults to DMX Out.
Setting the Out Type of Universe 1 in Setup, DMX I/O to MagicDMX will automatically set this option to
DMX Out.
Note that DMX In is not available on the MagicDMX Basic version.
19.13.3 Serial COM port
MagicQ supports one serial port for remote connections. On MagicQ consoles select COM1. On MagicQ
PC select a COM port from COM1 to COM8 depending on which COM port you wish to use.
19.13.4 Serial baud rate
MagicQ consoles support baud rates from 300 to 57600. Baud rates supported on MagicQ PC will depend
on the PC.
19.13.5 Serial parity
MagicQ PC supports None, Odd, Even, Mark and Space. MagicQ consoles only support None, Odd,
Even.
To Next Page
Loading...
Need help?
General
