ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 285 Version 1.4.9.0
34.3 Timecode generation
MagicQ can also master time code. In Setup, choose between SMPTE timecode and MIDI timecode.
There are special macro field commands to enable time code mastering and to set the time code.
W <enable> Enable / disable time code generation (1 for enable, 0 for disable)
Q <time code> Set current time code (also enables time code generation)
For example to set timecode to 0:0:10:0
Q0,0,10,0
34.4 Timecode re-transmit
The LTC or MIDI timecode received from a ChamSys MIDI/SMPTE interface can be retransmitted over
the network as Art-Net timecode.
To Next Page
Loading...
