ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 299 Version 1.4.9.0
39.5 WYSIWYG
MagicQ interfaces to the WYSIWYG visualiser using TCP/IP – this requires a network port on the PC.
To run MagicQ
39.5.1 Running MagicQ PC
Start up MagicQ PC - you should see the initial screen requesting whether you wish to continue you the
existing show, load a new show, or want help.
Click "load a new show". When asked whether you want to erase the existing show from memory select
yes. Select the show "wysiwyg.shw". This will load a demonstration show designed to work with the
WYSIWYG demonstration show. Note, if you have already closed the initial screen, then you can load a
new show at any time by clicking the Setup button and selecting Load Show.
To Next Page
Loading...
