ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 169 Version 1.4.9.0
19.8 Keypad / Encoder Settings
19.8.1 Auto enter on keypad intensity set
This setting determines whether when entering keypad intensity settings an ENTER is required. If set
then an auto enter is processed when 2 digits have been keyed in after @ or immediately after FULL.
1 THRU 4 @ 50
or
1 THRU 4 @ FULL
19.8.2 Select heads on keypad intensity set
This setting determines whether the current head selection is modified when you set intensities using the
keypad. If this option is not set then intensities are set without modifying the head selection. If set, then
the intensities are set and then the head selection is modified, for example:
1 THRU 4 @ 50 ENTER
sets heads 1 to 4 at 50% intensity and selects heads 1 to 4.
+5 @ FULL
sets head 5 to 100% intensity and adds head 5 to the current selection
19.8.3 Select Heads and Palettes from keypad
This setting was renamed from “Select Heads in Col, Beam, Pos”
This setting enables you to select Heads and Palettes from the keypad and various other advanced keypad
functions. Select heads by typing the head selection and then pressing the appropriate Colour, Beam or
Position Window button.
1 THRU 4 COL
selects heads 1 through 4 and opens the Colour Window.
1 THRU 4 COL 5
selects heads 1 through 4 and selects Colour Palette 5.
It also enables selecting on Color, Beam and Position palettes direct from the keypad.
19.8.4 Select heads on include
This setting determines whether when you include Cues and Palette entries into the programmer the
console automatically selects the heads.
If set to Yes, the console selects all heads that have levels in the Cue or Palette entry.
To Next Page
Loading...
Need help?
General
