ChamSys MagicQ - Default Miditable.txt File

ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 278 Version 1.4.9.0
From MagicQ Software version 1.3.6.5 it is also possible to map the note or velocity directly into the
remote command using the %01 for the note and %02 for the velocity.
So the following command would look for Note On, Note 36 and then use the Velocity to jump to a
specific step on the Playback.
144,36”1,%02j”
144,36”82,%02H”
The %02 is replaced with the velocity received, so that if MagicQ receives
144 36 50
then it will execute the remote command
1,50j
Which jumps to Cue Id 50 on Playback 1
33.1.4 Default miditable.txt file
144,36"1t"
128,36"1u"
144,38"2t"
128,38"2u"
144,40"3t"
128,40"3u"
144,41"4t"
128,41"4u"
144,43"5t"
128,43"5u"
144,45"6t"
128,45"6u"
144,47"7t"
128,47"7u"
144,48"8t"
128,48"8u"
144,50"9t"
128,50"9u"
144,52"10t"
128,52"10u"
144,53"11t"
128,53"11u"
144,54"12t"
128,54"12u"
144,55"13t"
128,55"13u"
144,56"14"
128,56"14u"
144,57"15t"
128,57"15u"
144,58"16t"
128,58"16u"
144,59"17t"
128,59"17u"
144,60"18t"
128,60"18u"
144,61"19t"
128,61"19u"
144,62"20t"
128,62"20u"
144,63"21t"
128,63"21u"
144,64"22t"
128,64"22u"
144,65"23t"
128,65"23u"
144,66"24t"