ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 235 Version 1.4.9.0
For other Windows machines choose Start > Run, type in cmd and type enter. Enter ipconfig into the
command line and type enter. The IP address of the network card(s) will then be displayed.
Optionally set up a name for the media server. This may help you to distinguish the different media
servers.
Select the type of media server and the version:
Set the number of layers you have patched – this is the number of media layers, and does not include
master layers, soft edge or camera layers.
Set the head number of the first media layer. This tells MagicQ which patched layer is the first media
layer on the media server. MagicQ expects layers to be sequential head numbers, e.g. set you head
numbers for your layers to 1 to 8.
Arkaos
For Arkaos 3.6 and above and Media Master choose MSEX (Arkaos). For Arkaos 3.5 select Arkaos. Set
the version number to 0. Arkaos supports 8 layers.
Catalyst
Select Catalyst and set the version number to 0.
Coolux
Select Coolux and set the version number to 0. The number of layers should be set to the total number of
layers patched.
Hippotizer
For Hippotizer choose either Hippo Stage or Hippo Express depending on which type you are using. For
Hippo HD use Hippos Stage. Set the version field according to the version, 2 for Hippo v2, 3 for Hippo
v3.
Maxedia
For Maxedia choose MSEX and set the version number to 0.
Mbox
For Mbox choose Mbox and set the version number to 0.
To Next Page
Loading...
