ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 269 Version 1.4.9.0
To send text only:
Y”abcedf”
To send several lines of text:
Y”Hello”,10,13,”World”,10,13
On the Ethernet the data above is encapsulated in the data field of ChamSys Ethernet Remote Protocol in
the UDP packet.
Note that commas ‘,’ are not allowed within the ASCII data inside “ “ or ‘ ‘ . If you wish to send ‘,’ then
you must send it as its hexadecimal ASCII code.
To Next Page
Loading...
