ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 318 Version 1.4.9.0
The Pos Window is used to set the pan and tilt attributes of intelligent heads using the Attribute Type
method. The Pos Window also displays and allows selection of Palette entries from the Position Palette.
It also supports the Flip function for moving heads.
Pressing and holding the Pos button causes the Pos Window to be temporarily made the active window
until the button is released.
Colour
This is a Window select button. Pressing this button makes the Colour Window the active window. If the
window was not open, then the window is opened.
The Colour Window is used to set the colour attributes of intelligent heads using the Attribute Type
method. The Colour Window also displays and allows selection of Palette entries from the Colour Palette.
Pressing and holding the Colour button causes the Colour Window to be temporarily made the active
window until the button is released.
Beam
This is a Window select button. Pressing this button makes the Beam Window the active window. If the
window was not open, then the window is opened.
The Beam Window is used to set the colour attributes of intelligent heads using the Attribute Type
method. The Beam Window also displays and allows selection of Palette entries from the Beam Palette.
Pressing and holding the Beam button causes the Beam Window to be temporarily made the active
window until the button is released.
Next Head
Used to select the next head from the currently selected heads. See selecting individual heads.
Prev Head
Used to select the previous head from the currently selected heads. See selecting individual heads.
Locate
Pressing LOCATE, locates all the selected heads.
Fan
Used to enter Fan Mode. Fan mode enables adjustments to a number of selected heads to be applied in a
non-linear fashion.
Pressing and holding Fan enables Fan mode to be entered temporarily. Make your changes and then
release the Fan button.
Highlight
To Next Page
Loading...
