D-Link DGS-1210/ME series - Page 106

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
86
Command Parameter
community_encryption
create snmp group
<groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv |
auth_priv]{notify_view <view_name 32>}] {read_view <view_name 32> |
write_view <view_name 32>}
delete snmp group <groupname 32> [v1 | v2c | v3] [auth_nopriv | auth_priv | noauth_priv]
show snmp global state
show snmp groups
create snmp host
<ipaddr> [v1 <username 32> | v2c <username 32> | v3 [noauth_nopriv |
auth_nopriv | auth_priv] <username 32>]
delete snmp host <ipaddr>
show snmp host {<ipaddr>}
create snmp v6host
<ip6_addr> [v1 <username 32> | v2c <username 32> | v3 [noauth_nopriv |
auth_nopriv | auth_priv] <username 32>]
delete snmp v6host <ip6_addr>
show snmp v6host <ip6_addr>
enable trusted_host
disable trusted_host
create trusted_host
[<ipaddr> | network <network_address> | <ip6_addr> | ipv6_prefix
<ipv6networkaddr>]
show trusted_host
delete trusted_host
[<ipaddr> | network <network_address> | <ip6_addr> | ipv6_prefix
<ipv6networkaddr> | all]
enable snmp traps
disable snmp traps
enable snmp
authenticate traps
disable snmp
authenticate traps
show snmp traps
enable snmp
linkchange_traps
disable snmp
linkchange_traps
config snmp
linkchange_traps ports
[<portlist> | all] [enable | disable]
show snmp traps
linkchange_traps
config snmp
system_contact
<string 128>