DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
385
delete port_security _entry
Purpose
To delete a port security entry by VLAN, VLAN ID, and MAC
address.
Syntax delete port_security_entry [vlan <vlan_name 32> | vlanid
<vlanid 1-4094>] mac_address <macaddr>
Description The delete port_security_entry command is used to delete a port
security entry by VLAN, VLAN ID, and MAC address.
Parameters <vlan_name 32> – Specifies the VLAN name.
<vlanid 1-4094> - Specifies the VLAN ID.
<macaddr> - Specifies the MAC address.
Restrictions
Only administrator or operator-level users can issue this command.
Example usage:
To delete the port security entry with a MAC address of 00-01-30-10-2c-c7 on the default VLAN:
DGS-1210-28MP/ME:5# delete port_security_entry vlan default mac_address 00-01-
30-10-2C-C7
Command: delete port_security_entry vlan default mac_address 00-01-30-10-2C-C7
Success.
DGS-1210-28MP/ME:5#
clear port_security _entry
Purpose
To clear the MAC entries learned by the port security function.
Syntax clear port_security_entry [all | port <portlist>]
Description The clear port_security_entry command is used to clear the MAC
entries learned by the port security function.
Parameters [all | port <portlist>] – Specify all ports or a list of port for MAC
entries to be cleared.
Restrictions
Only administrator or operator-level users can issue this command
Example usage:
To clear all port security entries:
DGS-1210-28MP/ME:5# clear port_security_entry all
Command: clear port_security_entry all
Success.
DGS-1210-28MP/ME:5#
To Next Page
Loading...
