DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
444
DGS-1210-28MP/ME:5# disable authen_policy
Command: disable authen_policy
Success.
DGS-1210-28MP/ME:5#
config authen application
Purpose To configure various applications on the Switch for authentication
using a previously configured method list.
Syntax
config authen application {console | http | ssh | telnet | all]
[login | enable] [default | method_list_name <string 15>]
Description
The config authen application command configures Switch
applications (console, Telnet, SSH) for login at the user level and at
the administration level (authen_enable), utilizing a previously
configured method list.
Parameters
application – Specifies the application to configure. One of the
following four options may be selected:
• console – Configures the command line interface login
method.
• http – Configures the http login method.
• ssh – Configures the Secure Shell login method.
• telnet – Configures the telnet login methods.
• all – Configures all applications as (console, Telnet, SSH)
login methods.
login – Configures an application for normal login on the user level,
using a previously configured method list.
enable – Configures an application for upgrading a normal user level
to administrator privileges, using a previously configured method list.
default – Configures an application for user authentication using the
default method list.
method_list_name <string 15> – Configures an application for user
authentication using a previously configured method_list_name.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the default method list for the command line interface:
DGS-1210-28MP/ME:5# config authen application http login default
Command: config authen application http login default
Success.
DGS-1210-28MP/ME:5#
Purpose To display authentication methods for the various applications on the
Switch.
To Next Page
Loading...
