DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
44
show greeting_message
Purpose Used to view the currently configured greeting message configured
on the Switch.
Syntax
show greeting_message
Description
The show greeting_message command is used to view the
currently configured greeting message on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view the currently configured greeting message:
DGS-1210-28MP/ME:5# show greeting_message
Command: show greeting_message
DGS-1210-28MP/ME Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 7.01.B030
Copyright(C) 2012 D-Link Corporation. All rights reserved.
DGS-1210-28MP/ME:5#
To Next Page
Loading...
