D-Link DGS-1210/ME series - Config Erps Trap; Create Erps Ring; Config Erps Ring Ring_Id

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
245
DGS-1210-28MP/ME:5#DGS-1210-28MP/ME:5#
config erps trap
Purpose Used to enable or disable the ERPS trap on the switch.
Syntax
config erps trap [enable | disable]
Description
The config erps trap commanmd is used to enable or disable the
trap of ERPS VLAN on the switch.
Parameters
[enable | disable] – Specify to enable or disable the trap of ERPS
VLAN.
Restrictions Only Administrator, operator and power user-level users can issue
this command.
Example usage:
To enable an ERPS trap:
DGS-1210-28MP/ME:5#DGS-1210-28MP/ME:5# config erps grap enable
Command: config erps grap enable
Success.
DGS-1210-28MP/ME:5#DGS-1210-28MP/ME:5#
create erps ring
Purpose Used to create an ERPS ring on the switch.
Syntax
create erps ring <string 32>
Description
The create erps ring commanmd is used to create the ERPS ring
on the switch.
Parameters
<string 32> - Specify the ring.
Restrictions Only Administrator, operator and power user-level users can issue
this command.
Example usage:
To create an ERPS ring:
DGS-1210-28MP/ME:5#DGS-1210-28MP/ME:5# create erps ring ring2
Command: create erps ring ring2
Success.
DGS-1210-28MP/ME:5#
config erps ring ring_id
Purpose Used to configure the ring ID of a specific physical ring.