D-Link DGS-1210/ME series - Show Stp

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
176
Protocol to be globally disabled on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable STP on the Switch:
DGS-1210-28MP/ME:5# disable stp
Command: disable stp
Success.
DGS-1210-28MP/ME:5#
show stp
Purpose To display the Switch’s current STP configuration.
Syntax
show stp
Description
The show stp
command displays the Switch’s current STP
configuration.
Parameters None.
Restrictions None.
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DGS-1210-28MP/ME:5# show stp
Command: show stp
STP Bridge Global Settings
--------------------------------------------
STP Status : Enabled
STP Version : RSTP
Bridge Priority : 32768
Max Age : 18
Hello Time : 2
Forward Delay : 15
TX Hold Count : 6
Forward BPDU : Enabled
Root Cost : 0
Root Maximum Age : 18
Root Forward Delay : 15
Root Port : 0
Root Bridge : 80:00:9C:D6:43:60:4F:A4
DGS-1210-28MP/ME:5#
Status 2: STP enabled for RSTP