D-Link DGS-1210/ME series - Disable Jumbo_Frame; Show Jumbo_Frame; Show Serial_Port

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
17
disable jumbo_frame
Purpose To disable jumbo frames on the device.
Syntax
disable jumbo_frame
Description
The disable jumbo_frame command disables jumbo frames on the
device.
Parameters None.
Restrictions Only Administrator or operate-level users can issue this command.
Jumbo frames will be disabled after save and restart.
Example usage:
To disable jumbo_frames:
DGS-1210-28/ME:5# disable jumbo_frame
Command: disable jumbo_frame
Success.
DES-1210-52/ME:5#
show jumbo_frame
Purpose To display the jumbo frame configuration.
Syntax
show jumbo_frame
Description
The show jumbo_frame
command displays the jumbo frame
configuration.
Parameters None.
Restrictions None.
Example usage:
To show the jumbo_frames configuration status on the device:
DGS-1210-28MP/ME:5# show jumbo_frame
Command: show jumbo_frame
Jumbo frame is enable.
Success.
DGS-1210-28MP/ME:5#
show serial_port
Purpose
Used to display the current serial port settings.
Syntax
show serial_port
Description
The show serial_port
command displays the current serial port
settings.