DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
273
Command: disable asymmetric_vlan
Success.
DGS-1210-28MP/ME:5#
Purpose To display the Asymmetric VLAN status on the Switch.
Syntax
show asymmetric_vlan
Description
The show asymmetric_vlan command displays the Asymmetric
VLAN status on the Switch.
Parameters
None.
Restrictions None.
Example usage:
To display Asymmetric VLAN status:
DGS-1210-28MP/ME:5# show asymmetric_vlan
Command: show asymmetric_vlan
Asymmetric VLAN : Enable
DGS-1210-28MP/ME:5#
Purpose To enable auto assignment of PVID.
Syntax
enable pvid auto_assign
Description
The enable pvid auto_assign command enables the auto-assign of
PVID. When this is enabled, PVID will be possibly changed by PVID
or VLAN configuration. When user configures a port to VLAN X’s
untagged membership, this port’s PVID will be updated with VLAN
X. In the form of VLAN list command, PVID is updated with last item
of VLAN list. When user removes a port from the untagged
membership of the PVID’s VLAN, the port’s PVID will be assigned
with “default VLAN”. The default setting is enabled.
Parameters None.
Restrictions
Only Administrator, Operator and Power-User-level users can issue
this command.
Example usage:
To enable the auto-assign PVID:
DGS-1210-28MP/ME:5# enable pvid auto_assign
Command: enable pvid auto_assign
Success.
DGS-1210-28MP/ME:5#
disalbe pvid auto_assign
Purpose To disable auto assignment of PVID.
To Next Page
Loading...
