D-Link DGS-1210/ME series - Show Snmp Global State; Show Snmp Groups

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
98
characters.
Restrictions Only administrator, operate or power user-level users can issue this
command.
Example usage:
To delete the SNMP group named ‘sg1’:
DGS-1210-28MP/ME:5# delete snmp group sg1 v3 auth_priv
Command: delete snmp group sg1 v3 auth_priv
Success.
DGS-1210-28MP/ME:5#
show snmp global state
Purpose To display the global state of SNMP curr
ently configured on the
Switch.
Syntax
show snmp global state
Description
The show snmp global state command displays the global state of
SNMP groups currently configured on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the currently configured SNMP global state on the Switch:
DGS-1210-28MP/ME:5# show snmp global state
Command: show snmp global state
SNMP Global State : Enable
DGS-1210-28MP/ME:5#
show snmp groups
Purpose To display the group-
names of SNMP groups currently configured
on the Switch. The security model, level, and status of each group
are also displayed.
Syntax
show snmp groups
Description
The show snmp groups command displays the group-
names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
Parameters None.
Restrictions None.
Example usage:
To display the currently configured SNMP groups on the Switch: