D-Link DGS-1210/ME series - Config Accounting Service Command; Create Accounting Method_List_Name

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
455
Success.
DGS-1210-28MP/ME:5#
config accounting service command
Purpose To configure the state of the specified accounting service.
Syntax
config accounting service command {administrator | operator |
power_user | user} [method_list_name <string> | none]
Description
The config accounting service command command is used to
configure the state of the specified accounting service.
Parameters
administrator – Specifies the accounting service for all administrator
level commands.
operator –
Specifies the accounting service for all operator level
commands.
power_user – Specifies the accounting service for all power-user
level commands.
user - Specifies the accounting service for all user level commands.
method_list_name <string 15> - Specifies the accounting service by
the AAA user-defined method list.
none -
Specifies to disable accounting services for the specified
command level.
Restrictions Only administrator-level users, Operator and Power-User level users
can issue this command.
Example usage:
To configure the AAA accounting methodlist "admin_acct" for accounting to all administrator commands:
DGS-1210-28MP/ME:5# #config accounting service command administrator
method_list_name admin_acct
Command: config accounting service command administrator method_list_name
admin_acct
Success.
DGS-1210-28MP/ME:5#
create accounting method_list_name
Purpose To create a user-defined list of accounting methods for accounting
serviceson the Switch..
Syntax
create accounting method_list_name <string 15>
Description
The create accounting method_list_name command
is used to
create a user-
defined list of accounting methods for accounting
services on the Switch.
Parameters
<string 15> - Specifies the built-in or user-defined method list.
Restrictions Only administrator-level users, Operator and Power-User level users
can issue this command.