D-Link DGS-1210/ME series - Delete Igmp_Snooping Multicast_Vlan; Config Igmp_Snooping Multicast_Vlan_Group

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
321
the member port for the multicast VLAN of IGMP snooping.
source_port <portlist> − Specifies a port or a range of ports to be the
source port for the multicast VLAN of IGMP snooping.
untag_source_port <portlist> − Specifies a port or a range of ports to
be the untage source port for the multicast VLAN of IGMP snooping.
tag_member_port <portlist> − Specifies a port or a range of ports to
be the tagged port for the multicast VLAN of IGMP snooping.
state [enable | disable] − Enables/Disables IGMP Snooping multicast
VLAN.
replace_source_ip [none | <ipaddr>] – Specifies the replace source
IP or none.
remap_priority [<value 0-7> | none] – Specifies the reamp priority or
none.
source_port_dynamical_learn state [enable | disable] – Specifies to
enable or disable source port dynamical learning state.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To configure the igmp snooping multicast VLAN:
DGS-1210-28MP/ME:5# config igmp_snooping multicast_vlan default state enable
Command: config igmp_snooping multicast_vlan default state enable
Success.
DGS-1210-28MP/ME:5#
delete igmp_snooping multicast_vlan
Purpose To remove an IGMP snooping multicast VLAN on the Switch.
Syntax
delete igmp_snooping multicast_vlan [all | <vlan_name 32>]
Description
The delete igmp_snooping multicast_vlan command removes
IGMP snooping multicast VLAN on the Switch.
Parameters
all − Specify all vlans to be removed.
<vlan_name 32> − Specify the multicast vlan name to be removed
on the Switch.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To remove the igmp snooping multicast VLAN ‘rd1’:
DGS-1210-28MP/ME:5# delete igmp_snooping multicast_vlan rd1
Command: delete igmp_snooping multicast_vlan rd1
Success.
DGS-1210-28MP/ME:5#
config igmp_snooping multicast_vlan_group
Purpose To specify that IGMP snooping is to be configured for multicast vlan